---
Bundle Details — Included Items:
Printer Only — A1 + AMS Lite + AMS Lite Filament Hub
Starter Bundle — A1 + AMS Lite + AMS Lite Filament Hub + 4 Filaments Rolls
Dryer Bundle — A1 + AMS Lite + AMS Lite Filament Hub + 4 Filaments Rolls + Sunlu S4 FilaDry
Scanner Bundle — A1 + AMS Lite + AMS Lite Filament Hub + 4 Filaments Rolls + Sunlu S4 FilaDry + Pop 3 Plus 3D Scanner (Advanced Edition)

Note:
Please specify your color choices in the delivery note. If no colors are selected, we’ll include a mix of mystery colors. 
Filament options include Bambu PLA, Bambu PLA Matte, Bambu PETG-HF, and Playmaker PLA Pro.

SKU:
Filament- A00-1.75-1000-SPL Basic/ A01-1.75-1000-SPL/ G02-1.75-1000-SPL/ PolyLite™ PLA Pro
Sunlu S4 Fila- S4 FilaDryer
Revopoint pop 3 Scanner- Revopoint POP 3 Plus
---

Introduction to A1 Mini Machine With AMS Lite:

Fully Automatic Calibration and Tuning
The A1 eliminates tedious manual setup by automatically calibrating Z-offset, bed leveling, vibration resonance, and nozzle pressure before every print, ensuring consistent accuracy and optimal print quality without user intervention.

No More “Paper Method” Calibration
The A1 directly probes the build plate with its nozzle to measure the absolute Z-offset, eliminating the need for paper-based referencing while ensuring precise and repeatable first-layer calibration.

Automatic X & Y Resonance Tuning for Precision Motion
Before every print, the A1 mini automatically calibrates resonance on both the X and Y axes using sensors in the toolhead and heatbed, making it one of the first bed-slinger printers to perform full dual-axis resonance tuning for improved accuracy and surface quality.

Automatic Belt Monitoring and Adjustment
The A1 automatically checks belt tension through vibration frequency calibration and, if looseness is detected, the HMS system notifies the user to adjust the auto belt tensioner to maintain optimal motion performance.

Advanced Active Flow Rate Control
The A1 transforms 3D printing precision with an eddy-current sensor that measures real-time nozzle pressure and an intelligent algorithm that actively adjusts flow rate, ensuring consistently accurate and highly reliable extrusion performance.

Active Motor Noise Cancelling
The A1 intelligently calibrates each drive motor to account for subtle individual differences, actively reducing harsh vibrations and unwanted noise for a smoother, quieter printing experience.

Bed Slinger With CoreXY Speed and High-Precision Performance
Equipped with full-metal rails, a rigid frame, nozzle pressure sensing, built-in accelerometers, a powerful MCU, and an advanced motion system, the A1 delivers CoreXY-level speed and accuracy, achieving a rule-compliant 14-minute Benchy straight out of the box without specialized filaments.

Intuitive Touchscreen Experience for Everyone
With a simplified touchscreen interface designed to feel as intuitive as a smartphone, the A1 guides users through every step of the printing process, making it accessible and easy to use without requiring prior 3D printing expertise.

Swift Maintenance with Quick-Swap Nozzles
The all-new quick-swap hotend design allows the nozzle to be removed and installed using a single clip, making maintenance fast, simple, and tool-free while minimizing downtime between prints.

Effortless Multi-Color Printing
The all-new AMS lite combines an elegant design with reliable performance to make multi-color 3D printing simple, consistent, and accessible for users of all experience levels.

Automatic Filament Backup for Uninterrupted Printing
With AMS lite, automatic filament backup seamlessly switches to a new spool when the current one runs out, ensuring continuous printing while reducing downtime and preventing filament waste caused by manual spool changes.

Improved Spool Compatibility
The spring-loaded rotary spool holder grips filament spools by their center hole, enhancing compatibility and ensuring stable feeding, especially for lightweight or paper spools.

Frequently asked questions:
Note: All answers are copied from Bambu Office website. They are from Bambu point of view.

1. Q: Do you have an official unboxing guide?
1. A: A: Yes, please refer to this https://wiki.bambulab.com/en/a1/manual/unboxing-a1-combo for the unboxing video guide.

2. Q: What is the maximum print size of the A1?
2. A: 256 * 256 *256 mm³. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

3. Q: What filament can A1 Print?
3. A:  1. Low-temperature filaments such as PLA, PETG, TPU, and support materials for PLA and PETG (Support for PLA, PVA, HIPS, etc.). 2. Conventional high-temperature filaments such as ABS, ASA, PC, PA, PA-CF/GF, PET-CF/GF, PPA-CF/GF, etc.
Kind Reminder: The standard nozzle is made of stainless steel. When printing filaments containing hard particles (CF, GF, etc.) such as PLA-CF/GF, PLA Glow-in-the-dark, PETG-CF/GF and PAHT-CF/GF, it is necessary to replace the nozzle with hardened steel to prevent excessive wear. Due to the A1's open-frame design and lower chamber temperature, there is a risk of reduced interlayer strength and increased warping for large-sized models and models with high filling density when using conventional high-temperature filaments such as ABS, ASA, PC, PA, PA-CF/GF, PET-CF/GF, PPA-CF/GF, etc. on the A1. However, these high-temperature filaments can be used on the A1 to print small-sized models with low filling density. The printing results may vary depending on the filaments' dry and wet state, the characteristics of the model itself, printing parameters, and the ambient temperature. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

4. Q: Is it ok to enclose the A1?
4. A: We don't recommend enclosing the A1. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

5. Q: Can you use multiple AMS lite units with the A1 for up to 16 color prints?
5. A: The A1 can only support one AMS lite, which means it can print with a maximum of 4 colors. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq.

6. Q: Can i use AMS on A1?
6. A: No, AMS is incompatible with the A1. You must use the AMS lite if you want a multi-color print using A1. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

7. Q: Can AMS lite be mounted on the beam of the A1 to reduce space occupation? if so, how should i proceed with the operation?
7. A: Please visit our https://makerworld.com/en/models/92486-ams-lite-top-mount-for-a1 where you will be able to find the model supports, installation tutorial, and purchase links for accessory screws. Additionally, you can also refer to our https://wiki.bambulab.com/en/a1/manual/ams-lite-top-mount-tutorial For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

8. Q: If i install AMS lite on the beam, will the filament spool slide down, or will it affect the accuracy of vibration compensation?
8. A: As long as the AMS lite is correctly installed, the filament spool should not slide down, even if the previous two spools have a certain forward tilt angle. Additionally, to avoid affecting the accuracy of vibration compensation, you can add reinforcement to the column. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

9. Q: Will you sell official refurbished A1 printers?
9. A: Currently, Factory Refurbished A1 units are only available for sale within the Chinese domestic market. There are no plans for overseas sales of Factory Refurbished units at this time. For your reference, all Refurbished units will have an "R" mark located on the back of the Base Housing, near the power cord plug. For more details, please check https://wiki.bambulab.com/en/a1/manual/faq

10. Q: Are the A1 3D Printers currently available for sale from the same batch that was recalled in January 2024?
10. A: No,they aren't. A1 3D printers sold after January 30, 2024 are not from the same batch as those recalled before. They already contain all the necessary fixes to mitigate the heatbed cable issue which caused the recall.