ePLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print.

And the reel is made by reusing injection molding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper.

Compared with ABS, ePLA-Matte has higher rigidity and PC-like strength and does not require a closed cavity, with low shrinkage, no warping and no cracking quality, and is suitable for large-size model printing.

The support is easy to peel from the surface with a  smooth and flat contact surface; There will be no irritating odor during printing, which is safe and environmentally friendly.

Make 3D printing more sustainable with the environmental protection concept; The matte surface is delicate and does not show layer lines; the filament is not easy to break which made the printing smooth for a long time without clogging. It can be used for early concept models and rapid prototyping.

Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.

Features:

• Environmental friendly
• Cost-effective
• High-speed printing
• Easy to peel off the support 
• Excellent printability
• Hard to break
• Matte surface effect
• Low density

Parameter:

• Print Temp（℃）: 190 - 230℃
• Bed Temp（℃）:   45 - 60°C
• Density(g/cm³) : 1.174
• Heat Distortion Temp(℃,0.45MPa) : 51
• Melt Flow Index(g/10min): 2.1（190℃/2.16kg）
• Tensile Strength(MPa): 34.56
• Elongation at Break(%): 56.1
• Flexural Strength(MPa) : 41.21
• Flexural Modulus(MPa) : 1119.41
• IZOD Impact Strength(kJ/m³): 33.15