- New
228 Bush Road, Rosedale | Mon–Sat 9:30–4:30
Micro Swiss FlowTech™ Hotend for Bambu Lab P1P/P1S Printers (with CM2™ CHT Hardened Tip - High Flow)
$175.00
Tax included
Auckland Local Stock
Compatible with both old and new Bambu Lab machines.
FlowTech™ CM2™ CHT Hotend fits for printers:
Bambu Lab P1P (old model)
The Micro Swiss FlowTech™ CM2™ CHT Hotend – Hardened Tip – High Flow is built for high-performance printing, featuring a hardened CHT nozzle for superior flow and wear resistance. Its one-piece design prevents leaks, simplifies nozzle swaps, and installs easily as a drop-in upgrade with no firmware or hardware changes needed.
Parts available in stock:
Micro Swiss FlowTech™ Silicone Socks (Pack of 3)
Micro Swiss CM2™ Nozzle - for FlowTech™ Hotend (0.4mm/0.6mm/0.8mm)
Micro Swiss CHT High Flow Nozzles for FlowTech™ Hotend (0.4mm/0.6mm)
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
FlowTech™ Hotend for Bambu Lab Printers
Microswiss FlowTech Hotend is designed with advanced features for optimized performance. Paired with Bondtech CHT High Flow Nozzles, this hotend delivers up to 50 mm³/sec for ultra-fast printing without compromising quality. Installation is simple and plug-and-play, allowing you to integrate it seamlessly into your Bambu Lab Printers.
Made in USA by Microswiss
Sealed Heater Core:
Unlike the original heater core, the FlowTech features a sealed heater core, providing the following benefits:
- Enhanced Heat Retention: The sealed design efficiently traps heat within the core, ensuring stable and consistent printing temperatures.
- Increased Durability: By protecting the heating element and thermistor, the sealed heater core reduces the risk of damage, extending the lifespan of the hotend.
CHT High Flow Performance:
An official collaboration between Microswiss and Bondtech brings the CHT High Flow nozzle to the FlowTech ecosystem. This nozzle incorporates proprietary CHT technology, specifically engineered to boost the flow rate and improve layer adhesion.
- High Flow CHT
The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec - Better layer adhesion
More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
*If the CHT Nozzle option is selected
Leak-Proof Nozzle:
The FlowTech Hotend integrates the nozzle and titanium thermal break into a single, permanently sealed assembly, ensuring a leak-proof design.
Cold Nozzle Change:
Changing the nozzle on a Bambu Lab printer usually requires removing the entire hotend. However, with the FlowTech hotend upgrade, the process becomes remarkably quick and easy.
The FlowTech nozzle, integrated with a heat break, allows you to change the nozzle without preheating the hotend. With a FlowTech Hotend, nozzle changes are effortless, requiring no hot tightening and can be done with just two fingers and 3D printed nozzle changing knob.
M3109P-CM2CHT
14 Items
Specific References
No customer reviews for the moment.
Customers who bought this product also bought:
![Bambu lab Lubricant Oil for 3D printer [FAZ031]](https://dev.marvle3d.co.nz/17606-home_default/lubricant-oil-for-3d-printer-faz031-.jpg)
Auckland Local Stock
Compatible with both old and new Bambu Lab machines.
FlowTech™ CM2™ CHT Hotend fits for printers:
Bambu Lab P1P (old model)
The Micro Swiss FlowTech™ CM2™ CHT Hotend – Hardened Tip – High Flow is built for high-performance printing, featuring a hardened CHT nozzle for superior flow and wear resistance. Its one-piece design prevents leaks, simplifies nozzle swaps, and installs easily as a drop-in upgrade with no firmware or hardware changes needed.
Parts available in stock:
Micro Swiss FlowTech™ Silicone Socks (Pack of 3)
Micro Swiss CM2™ Nozzle - for FlowTech™ Hotend (0.4mm/0.6mm/0.8mm)
Micro Swiss CHT High Flow Nozzles for FlowTech™ Hotend (0.4mm/0.6mm)
Micro Swiss FlowTech™ Hotend for Bambu Lab P1P/P1S Printers (with CM2™ CHT Hardened Tip - High Flow)
$175.00
Tax included