X-axis Linear Rail for A1 [FAC040 or FAC040-N]

X-axis Linear Rail for A1 [FAC040 or FAC040-N]

Name: X-axis Linear Rail for A1 [FAC040 or FAC040-N]
Brand: Bambu Lab
SKU: FAC040 or FAC040-N
Price: 145.5 NZD
Availability: InStock

Review (0)

$145.50

Tax included

Last items in stock

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Bambu Lab Part- X-axis Linear Rail for A1
-Genuine Bambu Lab X-axis linear rail for A1.
-Restores smooth, precise motion; reduces play/vibration.
-Pre-lubricated carriage; hardened, corrosion-resistant rail.
-Easy, factory-fit replacement; includes correct hardware.

Compatible Printers: Bambu Lab - A1

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

1. Remove X-Axis Assembly
-Tilt the printer back, unplug camera, X-motor, and Z-motor cables.
-Remove six screws at the back securing the X-axis. Detach the assembly.

2. Disassemble X-Axis Modules
-Remove the purge wiper, X-axis cover, and belt.
-Take out idler pulley, weight block, cable box, and camera.
-Remove old linear rail by undoing one front screw and three back screws.

3. Install New Linear Rail
-Mount new rail using the same screws and alignment.
-Reinstall X motor, belt, pulleys, and weight block.
-Reconnect all cables through the motor cover as before.

4. Reinstall X-Axis Assembly
-Slide the unit back onto Z-axis sliders and secure with screws.
-Reconnect all cables carefully to avoid pinching.

5. Final Check
-Power on and ensure smooth X-axis motion.
-Run calibration (bed leveling and vibration test).