Bambu Lab Toolhead Block for A1 Series [FAE013]

Bambu Lab Toolhead Block for A1 Series [FAE013]

Name: Bambu Lab Toolhead Block for A1 Series [FAE013]
Brand: Bambu Lab
SKU: FAE013
Price: 15 NZD
Availability: InStock

Review (0)

$15.00

Tax included

Auckland Local Stock

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Bambu Lab Part- Toolhead Block for A1
-Secures toolhead firmly in position
-Provides stable mounting for a1 series
-Durable construction for long term use
-Ensures accurate toolhead alignment
-Official replacement component

Compatible With: A1 Series

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Step 1: Remove the Extruder Module
Use an H2.0 Allen key to remove the extruder module by unscrewing the two D screws and two E screws.

Step 2: Remove the Fans
Remove the cooling fan for the hotend by unscrewing the two F screws using an H1.5 Allen key.

Step 3: Remove the Part Cooling Fan
Unscrew the two G screws and the one C screw using an H1.5 Allen key to remove the part cooling fan.

Step 4: Remove the Hotend Heating Assembly
Use an H2.0 Allen key to remove the three H screws, then lift out the hotend heating assembly from the toolhead.

Step 5: Remove the Toolhead Block
Loosen the belt by unscrewing the belt-tensioning screws I and removing the anti-rotation plate, then loosen all four belt block fixing screws J on both sides. After the belts are relaxed, remove the toolhead block by unscrewing the four K screws with an H2.0 Allen key.