Bambu Lab Rear Metal Panel for X1 Series 3D Printers [SPP045] [FAS011]

Bambu Lab Rear Metal Panel for X1 Series 3D Printers [SPP045] [FAS011]

Name: Bambu Lab Rear Metal Panel for X1 Series 3D Printers [SPP045] [FAS011]
Brand: Bambu Lab
SKU: SPP045 or FAS011
Price: 32 NZD
Availability: InStock

Review (0)

$32.00

Tax included

Auckland Local Stock.

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Rear Metal Panel compatible with X1 [SPP045] [FAS011]
-Metal rear panel for X series printers
-Installs on the back of the printer chassis
-Provides structural coverage and protection
-Durable metal construction
-Genuine replacement rear panel

Compatible Printers: Bambu Lab X1 Series

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Step 1 - Remove 4 screws
Remove the 4 coarse-thread screws with an H2.0 hex key.

Step 2 - Remove 10 screws
Remove the 10 fine-thread screws with an H2.0 hex key.

Step 3 - Remove the rear panel
Remove the rear panel by unlocking the left side belt tension port first, and then the right side one to avoid getting stuck.

Step 4 - Install the rear panel
Pass the PTFE tube through the tube bracket, install first the right side belt tension port, and then the left side to install the rear panel.

Step 5 - Lock 10 screws
Lock in the 10 fine-thread screws as shown in the picture below.

Step 6 - Lock 4 screws
Lock in the 4 coarse-thread screws as shown in the picture below.

How to verify completion/success
Check the appearance, the screws are not floating, and the rear panel is not deformed obviously.