Bambu Lab Display Connector Cable for P1 Series [CAB007]

Name: Bambu Lab Display Connector Cable for P1 Series [CAB007]
Brand: Bambu Lab
SKU: CAB007
Price: 7 NZD
Availability: InStock

Review (0)

$7.00

Tax included

Auckland Local Stock.

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Display Connector Cable for P1 [CAB007]
-Connects motherboard to the display screen
-Supports high-resolution screen operation
-Transmits SD card data between components
-Enables image data transfer to the display
-Genuine replacement connector cable

Compatible Printers: Bambu Lab P1 Series

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Disassembly Guide
Step 1: Remove the screen and the front cover
For P1P, please refer to the related content of the Screen: https://wiki.bambulab.com/en/p1/maintenance/screen and Front cover to remove the screen and front cover: https://wiki.bambulab.com/en/p1/maintenance/front-cover
For P1S, please refer to the related content of the Screen: https://wiki.bambulab.com/en/p1/maintenance/screen and Front cover to remove the screen and front cover https://wiki.bambulab.com/en/p1/maintenance/p1s-front-cover.

Step 2: Remove the sealing foam
Remove the sealing foam by hand, being careful not to use too much force to avoid damaging the components on the AP motherboard.

Step 3: Disconnect the WIFI antenna and remove screws
After the power is turned off, you can directly use a screwdriver to lift up the WIFI antenna and disconnect it.
Use the H2.0 Allen key to remove the 4 screws that hold the AP board in place.

Step 4: Disconnect the screen connector cable
Remove the AP board from the frame and disconnect the screen connector cable.