Bambu Lab MC AP Cable Pack (2-in-1) for P2S 3D Printer [CAB044]

Bambu Lab MC AP Cable Pack (2-in-1) for P2S 3D Printer [CAB044]

Name: Bambu Lab MC AP Cable Pack (2-in-1) for P2S 3D Printer [CAB044]
Brand: Bambu Lab
SKU: CAB044
Price: 16 NZD
Availability: InStock

Review (0)

$16.00

Tax included

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*MC AP Cable Pack (2-in-1) for P2S [CAB044]
-Connects MC board to AP board
-Enables data communication between boards
-Provides power supply to the AP board
-Includes two dedicated connection cables
-Genuine replacement cable pack

Compatible Printers: Bambu Lab P2S

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Removing the MC-AP Cable
Step 1: Remove the Rear Panel
You can refer to this wiki to remove the printer rear panel: Replace the P2S Rear Panel https://wiki.bambulab.com/en/p2s/maintenance/replace-rear-panel

Step 2: Remove the AP Cover
You can refer to this wiki to remove the AP cover: Replace the P2S AP Cover/LED Light - Left https://wiki.bambulab.com/en/p2s/maintenance/replace-ap-board-cover-and-led-light-left

Step 3: Remove the Waste Chute
Use an H1.5 hex wrench to remove the four fixing screws (BT2x5), then take off the waste chute.

Step 4: Disconnect the MC-AP cable
Press the plug latch to disconnect the MC-AP cable from the two connectors on the AP board, and remove it from the cable clips.
Press the plug latch to disconnect the MC-AP cable from the two connectors on the MC board.

Step 5: Remove the MC-AP Cable
First, take the outermost toolhead cable out of the cable channel, then sequentially release the MC-AP cable from the cable channel.
Then, as shown in the diagram, pull both MC-AP cables out of the cable channel and remove the cables.