- New
![Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]](https://dev.marvle3d.co.nz/17496-large_default/ap-board-cover-for-p2s-dlb049-v2-.jpg "Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]")
![Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]](https://dev.marvle3d.co.nz/17496-medium_default/ap-board-cover-for-p2s-dlb049-v2-.jpg "Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]")
![Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]](https://dev.marvle3d.co.nz/17497-medium_default/ap-board-cover-for-p2s-dlb049-v2-.jpg "Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]")
228 Bush Road, Rosedale | Mon–Sat 9:30–4:30
Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]
$20.00
Tax included
Auckland Local Stock
Authorized NZ Distributor – Marvle3D
*AP Board Cover for P2S [DLB049-V2]
-Plastic protective cover for the AP board
-Installs on the left side of the printer
-Shields AP board from dust and damage
-Protects connected cables and wiring
-Genuine replacement board cover
Compatible Printers: Bambu Lab P2S
Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
Removing the AP Board Cover
Step 1: Remove the PTFE Tube Bracket
Refer to the instructions for Replacing the PTFE Tube Bracket to remove the PTFE tube bracket. https://wiki.bambulab.com/en/p2s/maintenance/replace-ptfe-tube-bracket
Step 2: Unlock the AP Board Cover
Open the access end of the AP Board Cover and disconnect the LED Light - left cable from the AP board.
Use an H1.5 Allen key to remove the two AP board cover fixing screws (BT2x8).
Step 3: Remove the AP Board Cover
Hold the AP board cover connected to the cable chain and pull it to the right. Support the left side of the AP board cover with your left hand while pulling. As you pull out the right cable chain, continue holding the AP board cover with your left hand to prevent it from falling.
Starting from the AP board cover side, disconnect the cable chain at the second section, loosen the toolhead cable, and then remove the AP board cover.
Step 4: Remove the LED Light - Left
Use your hands to release the two buckles of the LED Light cover and remove the light cover from the AP Board Cover.
Loosen the connecting wires and remove the LED Light -Left from the AP board cover.
DLB049-V2
4 Items
Specific References
No customer reviews for the moment.
Auckland Local Stock
Authorized NZ Distributor – Marvle3D
*AP Board Cover for P2S [DLB049-V2]
-Plastic protective cover for the AP board
-Installs on the left side of the printer
-Shields AP board from dust and damage
-Protects connected cables and wiring
-Genuine replacement board cover
Compatible Printers: Bambu Lab P2S
Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.
Bambu Lab AP Board Cover for P2S 3D Printer [DLB049-V2]
$20.00
Tax included