Bambu Lab Filament Cutter Lever for A1 Series 3D Printers [FAC004-N]

Bambu Lab Filament Cutter Lever for A1 Series 3D Printers [FAC004-N]

Name: Bambu Lab Filament Cutter Lever for A1 Series 3D Printers [FAC004-N]
Brand: Bambu Lab
SKU: FAC004-N
Price: 6 NZD
Availability: InStock

Review (0)

$6.00

Tax included

Last items in stock

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Filament Cutter Lever for A1 Series [FAC004-N]
-Secures the filament cutter during operation
-Holds material cutting detection magnet in place
-Pressed to activate filament cutting process
-Automatically rebounds after cutting is complete
-Genuine replacement for consistent cutting action

Compatible Printers: Bambu Lab A1 Series

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Disassembly
Step 1: Remove the Filament Press Block
Remove the rotating wheel by using an H1.5 hex key wrench to unscrew 2 screws A. Then, take off the pressure block.

Step 2: Remove the Filament Hub Assembly
Use a wrench to delicately pry off the Filament Hub Cap. Then, remove the Filament Hub Assembly along with the corresponding spring.

Step 3：Remove the Filament Sensor
Use an H2.0 hex key wrench to unscrew 2 screws B and remove the Feeding Bracket.
Use an H1.5 hex key wrench to unscrew 2 screws C and remove the Filament Sensor.

Step 4: Remove the Replacement filament cutter
Use an H2.0 hex key wrench to unscrew one screw D, release the Filament Cutter Lever, and remove the filament cutter.