- New
![Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]](https://dev.marvle3d.co.nz/17520-large_default/usb-port-assembly-for-p2s-fac153-.jpg "Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]")
![Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]](https://dev.marvle3d.co.nz/17520-medium_default/usb-port-assembly-for-p2s-fac153-.jpg "Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]")
228 Bush Road, Rosedale | Mon–Sat 9:30–4:30
Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]
$15.00
Tax included
Auckland Local Stock
Authorized NZ Distributor – Marvle3D
*USB Port Assembly for P2S [FAC153]
-Replacement USB port module for printer top panel
-Enables direct USB drive connection
-OEM-spec fit and electrical interface
-Ideal for repairs or damaged USB ports
-Easy integration with existing wiring
Compatible Printers: Bambu Lab P2S
Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)
Removing the USB Port
Step 1: Remove the Screen and Front Cover
Please refer to the following wiki guidelines to remove the screen and front cover.
https://wiki.bambulab.com/en/p2s/maintenance/replace-screen
https://wiki.bambulab.com/en/p2s/maintenance/replace-front-cover
Step 2: Remove the USB Port
Press the latch of the USB port cable in to disconnect the cable from the AP board.
Use the H1.5 Allen key to remove the two screws securing the USB port and remove the USB port from the printer.
Installing the USB Port
Step 1: Install the USB Port
Align the USB socket into its groove and ensure that both sets of screw holes are aligned.
Replace the two screws with the H1.5 Allen key.
Note: Tighten one screw only partially before replacing the second screw. Once both screws are in place tighten both fully.
Connect the USB port cable to the AP board.
Step 2: Install the Front Cover and Screen
Please refer to the earlier mentioned wiki guidelines to reinstall the front cover and screen.
https://wiki.bambulab.com/en/p2s/maintenance/replace-screen
https://wiki.bambulab.com/en/p2s/maintenance/replace-front-cover
Verifying Functionality
Connect the power supply, turn on the printer, and insert the USB stick into the USB port to access a print file from it.
FAC153
4 Items
Specific References
No customer reviews for the moment.
Auckland Local Stock
Authorized NZ Distributor – Marvle3D
*USB Port Assembly for P2S [FAC153]
-Replacement USB port module for printer top panel
-Enables direct USB drive connection
-OEM-spec fit and electrical interface
-Ideal for repairs or damaged USB ports
-Easy integration with existing wiring
Compatible Printers: Bambu Lab P2S
Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.
Bambu Lab USB Port Assembly for P2S 3D Printer [FAC153]
$15.00
Tax included