Bambu Lab Air Filter Cover for P2S 3D Printer [FAC157]

Name: Bambu Lab Air Filter Cover for P2S 3D Printer [FAC157]
Brand: Bambu Lab
SKU: FAC157
Price: 10 NZD
Availability: InStock

Review (0)

$10.00

Tax included

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Air Filter Cover for P2S [FAC157]
-Detachable cover for air filter assembly
-Alllows airflow through exhaust path
-Holds filter securely in place
-Prevents debris reaching filter or fan
-OEM-spec replacement shell

Compatible Printers: Bambu Lab P2S

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Removing the Air Filter Cover and Air Filter
Step 1: Move the Heatbed
Using the screen of the P2S, lower the heatbed to the bottom of the printer. This will mean the bed is not obstructing access to the filter.

Step 2: Remove the Air Filter Cover
The air filter cover is secured by a clip on its left side. Push the left side of the air filter cover to the right to disengage the clip and remove the cover.
If the air filter cover is relatively tight, you can use tweezers to get a more secure grip on the cover and pull it out.

Step 3: Remove the Air Filter
Pull on the tab at the top or bottom of the air filter to pull it out of its compartment.

Installing the Air Filter and Air Filter Cover
Step 1: Install the Air Filter
Align the replacement air filter and gently push it into the compartment so that it is fully seated and flush.

Step 2: Install the Air Filter Cover
Insert the tabs on the right side of the air filter cover into the corresponding slots and rotate the cover into place, pushing until the clips engage and the cover is flush.

Verifying Functionality
The air filter cover is flush and even with the surrounding wall of the enclosure.