Bambu Lab Induction Hotend Latch Actuator H2C 3D Printer [FAC189]

Bambu Lab Induction Hotend Latch Actuator H2C 3D Printer [FAC189]

Name: Bambu Lab Induction Hotend Latch Actuator H2C 3D Printer [FAC189]
Brand: Bambu Lab
SKU: FAC189
Price: 20 NZD
Availability: InStock

Review (0)

$20.00

Tax included

Auckland Local Stock.

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*Induction Hotend Latch Actuator for H2C [FAC189]
-Core actuator for induction hotend locking
-Controls hotend fixation and release
-Mechanical structure driven latch system
-Enables secure hotend installation
-OEM-spec critical motion component

Compatible Printers: Bambu Lab H2C

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Overview:

The Induction Hotend Latch Actuator is the core component responsible for the locking and unlocking functions of the Induction Hotend. It controls the fixation and release of the Induction Hotend through a mechanical structure.

Removing the Old Induction Hotend Latch Actuator
Step 1: Move the Toolhead Assembly to the Back
Before you begin, move the toolhead assembly to the back to prevent interference during disassembly and assembly. Then, use an H2.0 screwdriver to remove the three fixing screws.

Step 2: Unlock the Induction Hotend Latch Actuator
Gently push the button indicated by the arrow on the component upward with your finger, and simultaneously slide the induction hotend latch actuator horizontally to unlock the component. Be careful not to damage the connecting cable during removal.

Step 3: Flip it Over to the Back and Disconnect the Connector