WiFi Antenna for P1/ A1 Mini [FAS009]

Name: WiFi Antenna for P1/ A1 Mini [FAS009]
Brand: Bambu Lab
SKU: FAS009
Price: 10.5 NZD
Availability: InStock

Review (0)

$10.50

Tax included

Auckland Local Stock.

Auckland Local Stock
Authorized NZ Distributor – Marvle3D

*WiFi Antenna for P1/ A1 Mini [FAS009]
-Improves WiFi signal strength and stability
-Enhances wireless connectivity reliability
-Optimised for consistent network performance
-Simple replacement antenna design
-Genuine accessory for supported printers

Compatible Printers: Bambu Lab P1 Series, A1 mini

Why Marvle3D?
Marvle3D—New Zealand’s expert since 2016, offering friendly support, in-store demos, and one of the country’s largest ranges.

Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Return policy(edit with the Customer Reassurance module)

Remove the faulty WIFI antenna
Step 1 - Remove the screen and the front cover
Refer to the related guides for the Screen and Front cover to remove the screen and front cover
https://wiki.bambulab.com/en/p1/maintenance/screen
https://wiki.bambulab.com/en/p1/maintenance/front-cover

Step 2 - Remove the sealing foam
Remove the sealing foam by hand, being careful not to use too much force to avoid damaging the components on the AP motherboard.

Step 3 - Remove 4 screws
After the power is turned off, you can directly use a screwdriver to lift up the WIFI antenna and disconnect it.
Use the H2.0 Allen key to remove the 4 screws that hold the AP board in place.

Step 4 - Remove the WIFI antenna
Loosen the AP main board from the beam, and remove the WIFI antenna.