Specification

• Volume: 1000g/bottle
• Viscosity: 150-250MPa·s
• Absorption band: 385nm-410nm(wavelength)
• Desity: 1.05-1.25g/cm3
• Flexural Modulus: 1.882-2.385Mpa
• Bending Strength: 40-70mpa
• Thermal Deformation Temperature: 80℃
• Volume Shrinkage: 3.72-4.24%
• Linear Shrinkage: 1.05-1.35%
• Tensile Strength: 30-52mpa
• Tensile Modulus: 1.779-2.385mpa
• Shore Hardness: 75D
• Glass Transition Temperature: 100℃
• Notch Impact Strength: 41-48j/m

Details

[Low Shrinkage and High Precision] ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process, which ensures the high precision of the print model with a smooth finish.

[Fast Curing and Great Stability] ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile, its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

[Bright and Stunning Colors] With high-quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning colour effect just like an artwork.

[Wide Applications] Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.

[Safe and Secure Packaging] Leak-proof bottle fully wrapped with a plastic bubble bag and exquisitely designed package box make sure the resin stays in place where they belong

Precautions

Dealing with resin could be messy and risky sometimes. To have a safer and better user experience, please follow the instructions below:

• Shake well before use
• Recommended temperature is 20°C - 25°C
• Always wear gloves and a mask to avoid direct skin contact
• Keep away from children, dust and direct sunlight
• Wash with plenty of water immediately if you get direct skin contact with resin