Highlight:

【Low Shrinkage and High Precision】
ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】
ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】
With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

【Wide Applications】
Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.

【Safe and Secure Packaging】
Leak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong

Parameters:

• Volume: 1000g/bottle
• ABS-LIKE Resin Parameters:
• Viscosity: 150-250MPa·s
• Absorption band: 385nm-410nm(wavelength)
• Desity: 1.05-1.25g/cm3
• Flexural Modulus: 1.882-2.385Mpa
• Bending Strength: 40-70mpa
• Thermal Deformation Temperature: 80℃
• Volume Shrinkage: 3.72-4.24%
• Linear Shrinkage: 1.05-1.35%
• Tensile Strength: 30-52mpa
• Tensile Modulus: 1.779-2.385mpa
• Shore Hardness: 75D
• Glass Transition Temperature: 100℃
• Notch Impact Strength: 41-48j/m

Precautions:

• (Dealing with resin could be messy and risky sometimes. To have a safer and better user experience, please follow the instructions below：)
• Shake well before use
• Recommended temperature is 20°C - 25°C
• Always wear gloves and a mask to avoid direct skin contact
• Keep away from children, dust and direct sunlight
• Wash with plenty of water immediately if you get direct skin contact with resin