---
Bundle Details — Included Items:
Printer Only — H2S Laser + 10W laser head + Filament Buffer + AMS 2 Pro
Starter Bundle — H2S Laser + 10W laser head + Filament Buffer + AMS 2 Pro + 4 Filament Rolls
Dryer Bundle — H2S Laser + 10W laser head + Filament Buffer + AMS 2 Pro + 4 Filaments Rolls + Sunlu S4 FilaDryer
Scanner Bundle — H2S Laser + 10W laser head + Filament Buffer + AMS 2 Pro + 4 Filaments Rolls + Sunlu S4 FilaDryer + Metro X 3D Scanner (Advanced Edition)

Note:
Please specify your color choices in the delivery note. If no colors are selected, we’ll include a mix of mystery colors. 
Filament options include Bambu PLA, Bambu PLA Matte, Bambu PETG-HF, and Playmaker PLA Pro.

SKU:
Filament- A00-1.75-1000-SPL Basic/ A01-1.75-1000-SPL/ G02-1.75-1000-SPL/ PolyLite™ PLA Pro
Sunlu S4 FilaDryer- S4 FilaDryer
Metro X 3D Scanner (Advanced Edition)- RP-6975577880895
---

Introduction to H2S Machine Laser Edition:

Live Spatial Alignment
Using a top-down BirdsEye camera and an onboard toolhead camera, Live Spatial Alignment previews the toolpath directly on the material with up to 0.3 mm accuracy, delivering true what-you-see-is-what-you-get precision.

Auto Arrangement
Bambu Studio automatically arranges your project shapes to maximize material usage on every sheet, delivering a smart, efficient, and effortless workflow.

10W 455 nm Laser Power
Delivers clean, fast, and precise cutting, capable of slicing through materials such as plywood, acrylic, and PU up to 5 mm thick with ease.

Air Assist
Improve surface quality by directing high-speed air along the laser path, cooling the cut area and ensuring cleaner, more precise results.

Digital Cutting
Effortlessly cut through paper, vinyl, PU leatherette, and more, delivering clean, accurate results that are ready to use straight off the machine.

Drawing
Use the drawing module to automate linework, sketches, or handwritten notes with precise, repeatable, and completely hands-free operation.

One Print. Perfect Fit.
Bambu Lab’s Auto Hole and Contour Compensation minimizes printing tolerances to achieve highly accurate hole dimensions, allowing fit-critical parts—such as those using shafts, bearings, and fasteners—to assemble correctly right after printing without repeated trial and error.

Ready for Engineering Filaments
With a 350 °C hotend and a 65 °C actively heated chamber, the H2S supports the full Bambu filament lineup—from PLA and PETG to PC and PPA—using closed-loop fan control and precise thermal management to reduce warping, improve layer adhesion, and reliably produce large, high-performance functional parts.

Even Surfaces, Crisp Edges
The H2S combines extruder servo motor sensing with high-resolution eddy current sensors at the nozzle to precisely control extrusion by measuring nozzle pressure and automatically calibrating pressure advance parameters for each filament, resulting in smoother surfaces and sharper, more accurate edges.

Precision in Motion
Active Vibration Compensation neutralizes micro-vibrations and resonance in real time, maintaining premium print quality even at higher printing speeds.

Print Functional Designs
Produce strong, real-world parts such as a go-kart frame using PAHT-CF, a carbon-fiber-reinforced engineering filament designed for high strength, stiffness, and thermal stability.

20,000 Checks Per Second
Using closed-loop, real-time control, Bambu Lab’s proprietary PMSM servo system samples resistance and position at 20 kHz to dynamically adjust electromagnetic torque, stabilizing extrusion while actively detecting filament grinding or clogs in real time.

23 Sensors + 3 Cameras
With AI-driven real-time monitoring, each potential risk has its own dedicated detector, enabling the vision system to identify clumping, spaghetti, and purge chute jamming as they occur, prevent failed prints early, and power advanced features such as Live Spatial Alignment for precise laser and cutting calibration and Vision Encoder technology for enhanced positional accuracy.

Pre-Flight Checklist by AI
Before each operation, the H2S vision system runs an automated pre-flight checklist that scans the chamber for surface debris and instantly audits hardware configuration by identifying build plate properties, helping ensure a clean and correctly configured setup before printing begins.

Flap Switch Airflow & Filtration System
Designed for both 3D printing and laser cutting, the system offers three operating modes with a sealed chamber that recirculates internal air through the heater and air filter to stabilize high-temperature conditions, enabling large engineering prints with reduced warping and consistent performance.

Low-Temp Printing
The top vent opens to introduce cool air while maintaining a filtered exhaust, allowing PLA and PETG to be printed with the door closed and improving overhang and bridging performance.

Maximum Volume. Maximum Productivity.
With a generous 340 × 320 × 340 mm build volume—the largest among all Bambu Lab printers—the H2S enables large, complex designs to be fully realized in a single print.

Top Speed. More Reliable Than Ever.
Powered by Bambu Lab’s proprietary PMSM servo extrusion system with 67% more extrusion force, the H2S supports high-flow printing at up to 1000 mm/s toolhead speed and 20,000 mm/s² acceleration, reducing print times by up to 30% while maintaining consistent, top-tier print quality.

Quick-Swap Nozzle
Swap nozzles in seconds with no tools and no hassle—whether changing materials or nozzle sizes, the redesigned hotend makes the process fast, simple, and intuitive, even for first-time users.

Quiet by Design
With Active Motor Noise Canceling and optimized air-duct noise-reduction technology, the H2S operates below 50 dB, allowing you to print overnight or in shared spaces without disrupting your environment.

AMS 2 Pro Advanced Multi-Material & Filament Management
The AMS 2 Pro supports up to 24 colors or materials by serially connecting up to four AMS 2 Pro units and eight AMS HT units, features an electro-magnetic air vent for fast filament drying and air-tight storage, reaches drying temperatures up to 65°C, and uses a brushless motor to deliver up to 60% faster filament feeding speeds.

Intelligent Filament Drying & Sealed Storage
The electro-magnetic air vent enables automated venting for efficient dehumidification during drying, then seals airtight to maintain low humidity and preserve filament quality for extended periods of reliable printing.

Automatic Spool Rotation for Even Drying
During the drying process, the filament spools automatically rotate to promote consistent airflow and ensure more uniform moisture removal across the entire spool.

RFID-Based Automatic Filament Recognition
AMS 2 Pro uses RFID to automatically recognize Bambu official filaments and apply the correct drying settings, eliminating the need for manual configuration.

High-Speed Filament Feeding for Faster Multi-Material Printing
The Bambu permanent magnet synchronous servo motor increases filament feeding speed by up to 60%, improving multi-material printing efficiency and saving an average of about 10 minutes for every 100 filament changes.

Sync With Bambu Studio and Bambu Handy
Control and monitor your P1S remotely using Bambu Studio or the Bambu Handy app. The built-in camera lets you check print progress anytime and even record timelapse videos. Enjoy seamless connectivity and smarter printing from anywhere.


Frequently asked questions:
Note: All answers are copied from Bambu Office website. They are from Bambu point of view

1. Q: Does the H2S support laser and cutting functions?
1. A: It supports 10W laser and cutting but does not support 40W laser.

2. Q: Can a non-laser H2S be upgraded to a laser H2S?
2. A: Yes. The upgrade kit and its installation guide will be available some time after the product launch. Note that the upgrade kit uses an external air pump, which differs in installation structure from the built-in air pump. It must be installed externally and connected to the machine via an air tube. The upgraded printer has the same functionality and processing performance as the laser version.

3. Q: Can the H2S be upgraded to an H2D?
3. A: No, it is recommended to choose the model that suits your needs when placing an order.

4. Q: Is the H2S compatible with the first-generation AMS or AMS lite?
4. A: The first-generation AMS is fully plug-and-play compatible with the H2S for multi-color printing but does not support AMS drying. Due to fundamental differences in the feeding mechanism and buffer structure, the H2S does not support AMS lite.

5. Q: How many AMS 2 Pro and AMS HThotend and silicone sock of the H2S compatible with the H2D or A1?
5. A: The H2S supports up to 4 AMS 2 Pro and 8 AMS HT units, totaling 12 units with 24 filament slots, enabling up to 24-color printing.

6. Q: Are the hotend and silicone sock of the H2S compatible with the H2D or A1?
6. A: The H2S hotend and silicone sock are compatible with the H2D. While structurally similar to the A1 hotend, they are not fully compatible. For optimal print quality, we strongly recommend not using the A1 hotend on H2 series printers. Using an H2 series hotend on an A1 printer is feasible, but it requires the H2 series silicone sock.

7. Q: Are the H2S and A1 series tool heads the same? Can the components on the tool head be shared with the A1 series?
7. A: The H2S tool head features a completely new design, with optimized and upgraded components, including the extruder motor, filament drive wheel, hotend heating assembly, and cooling fan. As a result, the components on the H2S tool head are not compatible with the A1 series, except for the cutter blade.

8. Q: Are the build plates of the H2S and H2D compatible?
8. A: Yes, they are compatible.

9. Q: Does the H2S support motion accuracy calibration, and is the calibration plate from my previously purchased H2D compatible?
9. A: It supports motion accuracy calibration, and the H2D calibration plate is compatible.

10. Q: The AMS 2 Pro connects to the printer via a 6-pin interface. What are the two remaining 4-pin interface on the back of the H2S printer used for?
10 A: The two 4-pin ports on the back are reserved for future expansion accessories. For example, to upgrade a non-laser version of the printer to a laser version, one of these ports can be used to connect an external air pump.

11. Q: Does the H2S come with a standard USB drive, and what functions are affected without one? what are the USB drive specifications?
11. A: The package does not include a standard USB flash drive. You can still initiate printing normally without a USB, as the printer has built-in storage space to run print files. However, without a USB inserted, the following functions will be affected: 1. The recording and time-lapse photography functions can't be turned on; 2. Printing cannot be initiated through the LAN; 3. Print files cannot be sent to the machine for storage through the Bambu Studio; 4. Log files cannot be exported; USB requirements: USB2.0 protocol or above (actual minimum write speed needs to be greater than 10MB/s), supported file formats are FAT32 and exFAT. and the printer only supports mounting one USB, and cannot connect multiple USB via a USB hub.

12. Q: What precautions or recommendations are there for printing TPU with the H2S?
12. A: Due to TPU’s flexible nature, which can cause issues during feeding and printing, we’ve created a dedicated https://wiki.bambulab.com/en/h2/h2d-tpu-printing-guide. Following the guide ensures smooth TPU printing.

13. Q: What precautions should be taken when using the laser function?
13. A: Laser processing involves high-energy beams that may interact with flammable materials. Never leave the machine unattended during laser operation, ensure no flammable or explosive items are nearby, and refer to the https://wiki.bambulab.com/en/h2/laser-safety-document for detailed safety guidelines.